• 电话:0531-88273263
  • 传真:0531-88273263
  • Q  Q:497759781 1511259211
  • 手机:18653127035 15866644035
  • 地址:济南市历城区工业北路与幸福柳路向北150米路东(幸福柳广场北邻)
数字沙盘当前位置:首页-数字沙盘
    地台模型安装施工重要流程
    2016-8-13 9:49:34
    1 地面下挖尺寸为85cm,底部预留45cm检修空间,模型厚度一般为8cm左右,模型上面到地面的钢化玻璃一般
    1 under the ground to dig the size of 85CM, the bottom of the 45cm maintenance space reserved, model thickness is generally about 8cm, the model above to the ground of the tempered glass
    为30cm左右。如果模型没有光电则不需要留这么大的检修空间,一般为15cm空气流动空间即可。
    About 30cm. If the model does not have the photoelectric is not required to keep such a large overhaul space, generally 15cm air flow space can be.
    2 模型底部的支撑一般为钢结构,需要60cm的网格即可,不要全部密封的平面。
    2 model at the bottom of the support for the general structure of the steel, you need to 60cm the grid can be, do not all sealed plane.
    3 模型上面的钢化玻璃需要的支撑点应直接是联通到地面的支撑点,不能支撑在模型上面。
    The 3 model above the glass needs of the support point should be directly connected to the ground support point, can not be supported on the model above.
    4 模型的灯光控制开关应事先安排好位置,不能太远距离,模型的电源总线应单独设置空气开关,预留的电源线
    4 model of the lighting control switch should be arranged in advance, not too far, the model of the power bus should be set up separate air switch, set aside the power line
    一般为4平方以上的线材。
    Generally more than 4 square meters of wire.
    5 模型底部的空气流通问题,如果有管道可以连通空气源,则可以避免潮湿空气腐蚀模型的可能。
    5 the problem of air circulation at the bottom of the model, if there are pipes can be connected to the air source, you can avoid the possibility of humid air corrosion model.
    6 其他未知事项待现场查勘再议。
    6 other unknown matters need to be on site survey.
    本文由,济南机械模型制作提供帮助,更多的相关内容请点击: http://www./我们将详情为您解答.欢迎您的光临!
    In this paper, the Ji'nan mechanical model to provide help, more relevant content, please click: http://www./ we will be the details for you to answer!
    上一条:没有了
    下一条:沙盘模型的保养方法有哪些?